Meet Polaroid Support

Which product do you need help with?

Polaroid Mint Camera

Polaroid Mint Printer

Polaroid POP

Polaroid Snap

Polaroid Snap Touch

Polaroid ZIP

Polaroid Cube

Polaroid Cube+

GETTING STARTED

Getting started with your Polaroid POP

Step 1: Charge your camera

Plug the cable into a 1amp charge block and into your camera. Make sure the cable is not pulled tight

Step 2: Turn your camera on

Press and hold the shutter button until the screen turns on.

Step 3: Load Paper

Remove the bottom and insert paper with the blue sheet on the bottom into the slot. Replace bottom of printer.

Step 4: Take a picture

Hold the camera up and press the shutter button until you hear a click!

MOBILE APP

To unlock more ways to use the Polaroid POP camera, download the free mobile app for iOS and Android™ here.

GETTING STARTED

Getting started with your Polaroid Snap Camera

Step 1: Charge your camera

Plug the cable into a 1amp charge block and into your camera. Make sure the camera is laid flat on the ground and the cable is not fully extended.

Step 2: Turn on your camera

Step 3: Holding the camera for a selfie

LOAD THE PAPER

Step 1: Take the paper out of the foil. Do not separate the “BLUE COLOR CALIBRATION SHEET”.

Step 2: Load the stack of paper with the “BAR CODE” side face down A and glossy side face up B .

Press the power button to turn on the CAMERA

The LED light will turn white when ready and a chime will sound.

PUSH THE VIEW FINDER DOWN to turn the CAMERA OFF

The LED light will turn white when ready and a chime will sound.

GETTING STARTED

Getting started with your Polaroid Snap Touch Camera

Step 1: Charge your camera

Plug the cable into a 1amp charge block and into your camera. Make sure the camera is laid flat on the ground and the cable is not fully extended.

Step 2: Turn your camera on

Press and hold the power button until you hear the welcome sound.

Step 3: loading paper into the printer

Always load the blue sheet facing down with the gloss of the paper up. Avoid touching the paper as much as possible by holding from the sides.

Step 4: Holding the camera for a selfie

Step 5: Holding the camera for a picture

Step 6: Take a picture

Press the shutter button to take the picture

GET THE APP

Download our App from Google Play or Apple.

LOAD THE PAPER

Step 1: Take the paper out of the foil. Do not separate the “BLUE COLOR CALIBRATION SHEET”.

Step 2: Load the stack of paper with the “BAR CODE” side face down A and glossy side face up B .

Press the power button to turn on the CAMERA

The LED light will turn white when ready and a chime will sound.

PUSH THE VIEW FINDER DOWN to turn the CAMERA OFF

The LED light will turn white when ready and a chime will sound.

GETTING STARTED

Getting started with your Polaroid ZIP Printer

Step 1: Charge your printer

Plug the cable into a 1amp charge block and into your printer. Make sure the printer is laid flat on the ground and the cable is not fully extended.

Step 2: Turn on your printer

Press and hold the button on the side until the light flashes

Step 3: Connect your device to the app

Download the app from the app store and follow the on-screen instructions.

GETTING STARTED

Getting started with your Polaroid Cube Action Camera

HOW TO OPEN

Use a coin or other flat object to turn controls cover counterclockwise (Turn the cover clockwise to close, after accessing the MicroSD card slot).

MicroSD CARD

Insert the MicroSD card into the slot and gently push in until you hear a click.

VIDEO RECORDING

Step 1: Select the quality of your video recording to be 720p or 1080p.

Step 2: Hold down the center button for 3 seconds to power on your Polaroid Cube. The green light indicates that it is powered on.

Step 3: Tap the center button twice in quick succession to begin recording. Tap the center button once to stop recording.

CAPTURING A PHOTO

Step 1: Hold down the center button for 3 seconds to power on your Polaroid Cube.

Step 2: Tap the center button while not recording to capture a still image.

GETTING STARTED

Getting started with your Polaroid Cube+ Action Camera

GET THE APP

Download our App from Google Play or Apple App Store.

HOW TO OPEN

Open the back cover, a small coin can be used to pry open the door.

MICRO SD CARD

Insert a MicroSD card into the back of the Polaroid Cube+ (an orange light will flash and the Polaroid Cube+ will beep audibly to notify you while there is not a MicroSD card present).

Which product do you need help with?

GETTING STARTED

Getting started with your Polaroid POP

Step 1: Charge your camera

Step 2: Turn your camera on

Step 3: Load Paper

Step 4: Take a picture

MOBILE APP

GETTING STARTED

Getting started with your Polaroid Snap Camera

Step 1: Charge your camera

Step 2: Turn on your camera

Step 3: Holding the camera for a selfie

LOAD THE PAPER

Step 1: Take the paper out of the foil. Do not separate the “BLUE COLOR CALIBRATION SHEET”.

Step 2: Load the stack of paper with the “BAR CODE” side face down A and glossy side face up B .

Press the power button to turn on the CAMERA

PUSH THE VIEW FINDER DOWN to turn the CAMERA OFF

GETTING STARTED

Getting started with your Polaroid Snap Touch Camera

Step 1: Charge your camera

Step 2: Turn your camera on

Step 3: loading paper into the printer

Step 4: Holding the camera for a selfie

Step 5: Holding the camera for a picture

Step 6: Take a picture

GET THE APP

LOAD THE PAPER

Step 1: Take the paper out of the foil. Do not separate the “BLUE COLOR CALIBRATION SHEET”.

Step 2: Load the stack of paper with the “BAR CODE” side face down A and glossy side face up B .

Press the power button to turn on the CAMERA

PUSH THE VIEW FINDER DOWN to turn the CAMERA OFF

GETTING STARTED

Getting started with your Polaroid ZIP Printer

Step 1: Charge your printer

Step 2: Turn on your printer

Step 3: Connect your device to the app

GETTING STARTED

Getting started with your Polaroid Cube Action Camera

HOW TO OPEN

MicroSD CARD

VIDEO RECORDING

Step 1: Select the quality of your video recording to be 720p or 1080p.

Step 2: Hold down the center button for 3 seconds to power on your Polaroid Cube. The green light indicates that it is powered on.

Step 3: Tap the center button twice in quick succession to begin recording. Tap the center button once to stop recording.

CAPTURING A PHOTO

Step 1: Hold down the center button for 3 seconds to power on your Polaroid Cube.

Step 2: Tap the center button while not recording to capture a still image.

GETTING STARTED

Getting started with your Polaroid Cube+ Action Camera

GET THE APP

HOW TO OPEN

MICRO SD CARD

TURNING ON AND CONNECTING TO WIFI

Step 1: Hold down the center button for 3 seconds to power on your Polaroid Cube+.

Step 2: Hold down the WiFi button for 3 seconds to activate your Polaroid Cube+ network.

Step 3: Open the WiFi settings on your mobile device and select the Polaroid Cube+ network listed.

RECORDING

Step 1: Tap the center button twice in quick succession to begin recording.

Step 2: Tap the center button once to stop recording.

CAPTURING A PHOTO

Polaroid Mint

Polaroid POP

Polaroid Snap

Polaroid Snap Touch

Polaroid ZIP Printer

Polaroid Cube